A
-
Al-Cu nanocomposites
Burning rate of polyurethane composite propellant with energetic nano-composite additives [Volume 18, Issue 18, 2019, Pages 1-8]
-
Angle of arrival
Design and implementation of new security architecture for wireless network [Volume 18, Issue 18, 2019, Pages 1-14]
-
Autopilot design
Design of a roll autopilot for a skid-to-turn guided missile [Volume 18, Issue 18, 2019, Pages 1-15]
B
-
Backstepping
PID vs. Backstepping Control for Cooperative Quadrotors Unmanned Aerial Vehicles [Volume 18, Issue 18, 2019, Pages 1-23]
-
Ballistic performance
Composite solid rocket propellant based on GAP polyurethane matrix with different plasticizers [Volume 18, Issue 18, 2019, Pages 1-7]
-
Barker Code
Design and Implementation of an Advanced Radar Signal Processor with Waveform Generator and BIST Unit on a Single FPGA Chip [Volume 18, Issue 18, 2019, Pages 1-10]
-
Bending tests
Impact and bending analysis of composite scarf adhesive joints modified with MWCNTs at room and hot temperatures [Volume 18, Issue 18, 2019, Pages 1-21]
-
Bi halide perovskite
Crystal structure and optical properties of 1D-bi based organic-inorganic hybrid perovskite [Volume 18, Issue 18, 2019, Pages 1-13]
-
Blow-off
Study of cold spray and combustion stability of effervescent atomizer [Volume 18, Issue 18, 2019, Pages 1-15]
-
BTNEOx
Performance of advanced composite solid rocket propellants based on novel oxidizers [Volume 18, Issue 18, 2019, Pages 1-7]
-
Burning rate
Burning rate of polyurethane composite propellant with energetic nano-composite additives [Volume 18, Issue 18, 2019, Pages 1-8]
C
-
CFAR
A road map to the detection performance of LFM-PC search radars with CFAR detectors [Volume 18, Issue 18, 2019, Pages 1-16]
-
CFAR
Design and Implementation of an Advanced Radar Signal Processor with Waveform Generator and BIST Unit on a Single FPGA Chip [Volume 18, Issue 18, 2019, Pages 1-10]
-
CFD
Unsteady numerical analysis of drag on non-winged hypersonic vehicle during re-entry [Volume 18, Issue 18, 2019, Pages 1-11]
-
Classical control
Design of a roll autopilot for a skid-to-turn guided missile [Volume 18, Issue 18, 2019, Pages 1-15]
-
Combustion
Characteristics of a paste explosive (EPX-P20) used in explosive bolts for spacecraft’s applications [Volume 18, Issue 18, 2019, Pages 1-7]
-
Combustion efficiency
Spray combustion characteristics of effervescent atomizer inside experimental furnace [Volume 18, Issue 18, 2019, Pages 1-17]
-
Composite Propellant
Burning rate of polyurethane composite propellant with energetic nano-composite additives [Volume 18, Issue 18, 2019, Pages 1-8]
-
Composite structures
Review of challenges of the design of rocket motor case structures [Volume 18, Issue 18, 2019, Pages 1-13]
-
Cone angle
Study of cold spray and combustion stability of effervescent atomizer [Volume 18, Issue 18, 2019, Pages 1-15]
-
Convolutional neural network
Enhancing the performance of CNN-based blind image steganalysis approach using multi-GPU TESLA P100 [Volume 18, Issue 18, 2019, Pages 1-10]
-
Copper oxide
Performance, mechanical and thermal properties of double base rocket propellant including copper oxide as burning rate modifier [Volume 18, Issue 18, 2019, Pages 1-6]
-
CUDA
Enhancing the performance of CNN-based blind image steganalysis approach using multi-GPU TESLA P100 [Volume 18, Issue 18, 2019, Pages 1-10]
D
-
Deep learning
Enhancing the performance of CNN-based blind image steganalysis approach using multi-GPU TESLA P100 [Volume 18, Issue 18, 2019, Pages 1-10]
-
Detonation
Involving PETN explosive into polyurethane polymer matrix for reactive armour applications [Volume 18, Issue 18, 2019, Pages 1-6]
-
Detonation
Characteristics of a paste explosive (EPX-P20) used in explosive bolts for spacecraft’s applications [Volume 18, Issue 18, 2019, Pages 1-7]
-
Dilution of position
Wi-Fi based indoor localization using trilateration and fingerprinting methods [Volume 18, Issue 18, 2019, Pages 1-20]
-
Domestic Burner
Thermal and combustion characteristics of a double ring burner with different swirling flow patterns [Volume 18, Issue 18, 2019, Pages 1-13]
-
Doppler frequency
Detection of Targets with Small Apparent Doppler Frequencies in LFMCW Radars [Volume 18, Issue 18, 2019, Pages 1-8]
-
Double ring burner
Thermal and combustion characteristics of a double ring burner with different swirling flow patterns [Volume 18, Issue 18, 2019, Pages 1-13]
-
Duplex stainless steel 1.4462
Mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding for duplex stainless steel: A comparative study [Volume 18, Issue 18, 2019, Pages 1-15]
E
-
Electrical cars
Design of HHO cell as energy source for electric vehicles [Volume 18, Issue 18, 2019, Pages 1-8]
-
Electromechanical impedance
Depolarization diagnosis of PWAS used for EMI based structural health monitoring system for composite plates [Volume 18, Issue 18, 2019, Pages 1-11]
-
Equations of motion
Modeling of fixed wing UAV and design of multivariable flight controller using PID tuned by local optimal control [Volume 18, Issue 18, 2019, Pages 1-19]
-
Euler-Maruyama method
Mobile robot position estimation using Euler-Maruyama algorithm [Volume 18, Issue 18, 2019, Pages 1-8]
-
EV burner
Hyperspectral imaging and analysis of swirling flames issued from two and four slots circumferential burners [Volume 18, Issue 18, 2019, Pages 1-17]
-
Explosives
Theoretical and experimental study of underwater explosion performance of selected explosive compositions [Volume 18, Issue 18, 2019, Pages 1-12]
F
-
Fault-tree
Reliability prediction of on-board subsystem satellite by Monte Carlo methodology [Volume 18, Issue 18, 2019, Pages 1-11]
-
Ferrite %
Experimental verification of the parameters affecting the characteristics of mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding of stainless-steel joints [Volume 18, Issue 18, 2019, Pages 1-13]
-
FFT
Detection improvement of off-pin targets in FMCW radars [Volume 18, Issue 18, 2019, Pages 1-10]
-
Finite Element Modeling
Depolarization diagnosis of PWAS used for EMI based structural health monitoring system for composite plates [Volume 18, Issue 18, 2019, Pages 1-11]
-
Fixed-Wing UAV
Multivariable flight controller design for ultrastick-25e UAV [Volume 18, Issue 18, 2019, Pages 1-18]
-
Flame length
Study of cold spray and combustion stability of effervescent atomizer [Volume 18, Issue 18, 2019, Pages 1-15]
-
Flame temperature distribution
Spray combustion characteristics of effervescent atomizer inside experimental furnace [Volume 18, Issue 18, 2019, Pages 1-17]
-
Flight Controller
Multivariable flight controller design for ultrastick-25e UAV [Volume 18, Issue 18, 2019, Pages 1-18]
-
FMCW radars
Detection improvement of off-pin targets in FMCW radars [Volume 18, Issue 18, 2019, Pages 1-10]
-
FPGA
Design and Implementation of an Advanced Radar Signal Processor with Waveform Generator and BIST Unit on a Single FPGA Chip [Volume 18, Issue 18, 2019, Pages 1-10]
-
Fuel cell Electric Vehicle
Design of HHO cell as energy source for electric vehicles [Volume 18, Issue 18, 2019, Pages 1-8]
-
Fuzzy Logic controller
Multivariable flight controller design for ultrastick-25e UAV [Volume 18, Issue 18, 2019, Pages 1-18]
G
-
Gain schedule
Controller parameter tuning using actor-critic algorithm [Volume 18, Issue 18, 2019, Pages 1-8]
-
Genetic Algorithm
Multivariable flight controller design for ultrastick-25e UAV [Volume 18, Issue 18, 2019, Pages 1-18]
-
Genetic Algorithm
Modeling of fixed wing UAV and design of multivariable flight controller using PID tuned by local optimal control [Volume 18, Issue 18, 2019, Pages 1-19]
-
Genetic Algorithm
Optimized planar terahertz Yagi-Uda antenna using hybrid GSA-PSO optimization algorithm [Volume 18, Issue 18, 2019, Pages 1-5]
-
Glycidyl Azide Polymer (GAP)
Composite solid rocket propellant based on GAP polyurethane matrix with different plasticizers [Volume 18, Issue 18, 2019, Pages 1-7]
-
GPU
Enhancing the performance of CNN-based blind image steganalysis approach using multi-GPU TESLA P100 [Volume 18, Issue 18, 2019, Pages 1-10]
H
-
HAZ
Mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding for duplex stainless steel: A comparative study [Volume 18, Issue 18, 2019, Pages 1-15]
-
HDPE composite
Mechanical behaviour of rubber hybrid composites [Volume 18, Issue 18, 2019, Pages 1-8]
-
Heat Pipe
Investigation the effectiveness of using heat pipe on the temperature uniformity distribution over the SC equipment panel [Volume 18, Issue 18, 2019, Pages 1-15]
-
HHO (hydrogen generator)
Design of HHO cell as energy source for electric vehicles [Volume 18, Issue 18, 2019, Pages 1-8]
-
HMX
Performance characteristics of modified HMX-gun propellants [Volume 18, Issue 18, 2019, Pages 1-6]
-
Hypersonic aerodynamics
Unsteady numerical analysis of drag on non-winged hypersonic vehicle during re-entry [Volume 18, Issue 18, 2019, Pages 1-11]
-
Hyperspectral imaging
Hyperspectral imaging and analysis of swirling flames issued from two and four slots circumferential burners [Volume 18, Issue 18, 2019, Pages 1-17]
I
-
Image steganalysis
Enhancing the performance of CNN-based blind image steganalysis approach using multi-GPU TESLA P100 [Volume 18, Issue 18, 2019, Pages 1-10]
-
Impact bending stiffness
Impact and bending analysis of composite scarf adhesive joints modified with MWCNTs at room and hot temperatures [Volume 18, Issue 18, 2019, Pages 1-21]
-
Indoor navigation
Wi-Fi based indoor localization using trilateration and fingerprinting methods [Volume 18, Issue 18, 2019, Pages 1-20]
-
Integrator
Detection of Targets with Small Apparent Doppler Frequencies in LFMCW Radars [Volume 18, Issue 18, 2019, Pages 1-8]
-
IP
Design and implementation of new security architecture for wireless network [Volume 18, Issue 18, 2019, Pages 1-14]
J
-
Jamming
LFM-PC Radar Evaluation in Presence of Jamming using SystemVue [Volume 18, Issue 18, 2019, Pages 1-6]
K
-
Ka-Band
Low-cost steerable antenna for satellite applications [Volume 18, Issue 18, 2019, Pages 1-6]
-
K-means
Feature extraction from high resolution satellite images using K-means and colour threshold approach [Volume 18, Issue 18, 2019, Pages 1-12]
L
-
Laser
Factors affecting irradiation of nano & micro materials by laser treatment industrial unit [Volume 18, Issue 18, 2019, Pages 1-11]
-
LFMCW radar
Detection of Targets with Small Apparent Doppler Frequencies in LFMCW Radars [Volume 18, Issue 18, 2019, Pages 1-8]
-
LFM-PC
LFM-PC Radar Evaluation in Presence of Jamming using SystemVue [Volume 18, Issue 18, 2019, Pages 1-6]
-
LFM-PC
A road map to the detection performance of LFM-PC search radars with CFAR detectors [Volume 18, Issue 18, 2019, Pages 1-16]
-
Linearization
Modeling of fixed wing UAV and design of multivariable flight controller using PID tuned by local optimal control [Volume 18, Issue 18, 2019, Pages 1-19]
-
Linearization
Design of a roll autopilot for a skid-to-turn guided missile [Volume 18, Issue 18, 2019, Pages 1-15]
M
-
MAC
Design and implementation of new security architecture for wireless network [Volume 18, Issue 18, 2019, Pages 1-14]
-
Marble and Granite dust
Mechanical behaviour of rubber hybrid composites [Volume 18, Issue 18, 2019, Pages 1-8]
-
Master Slave Robotics and Genetic Algorithm
Control of master slave robotics system using optimal control schemes [Volume 18, Issue 18, 2019, Pages 1-12]
-
Matched Filter
Design and Implementation of an Advanced Radar Signal Processor with Waveform Generator and BIST Unit on a Single FPGA Chip [Volume 18, Issue 18, 2019, Pages 1-10]
-
Mathematical Modeling
Modeling of fixed wing UAV and design of multivariable flight controller using PID tuned by local optimal control [Volume 18, Issue 18, 2019, Pages 1-19]
-
MATLAB
A road map to the detection performance of LFM-PC search radars with CFAR detectors [Volume 18, Issue 18, 2019, Pages 1-16]
-
Mechanical Properties
Performance, mechanical and thermal properties of double base rocket propellant including copper oxide as burning rate modifier [Volume 18, Issue 18, 2019, Pages 1-6]
-
MF
A road map to the detection performance of LFM-PC search radars with CFAR detectors [Volume 18, Issue 18, 2019, Pages 1-16]
-
Mg
Optimization of low signature base bleed propellant formulations [Volume 18, Issue 18, 2019, Pages 1-10]
-
MICLIC
Performance analysis for aerial-towing system [Volume 18, Issue 18, 2019, Pages 1-11]
-
Microstrip array
Low-cost steerable antenna for satellite applications [Volume 18, Issue 18, 2019, Pages 1-6]
-
Modelling
Parametric study for reducing emission characteristics using different computational schemes [Volume 18, Issue 18, 2019, Pages 1-17]
-
Monte Carlo Methodology
Reliability prediction of on-board subsystem satellite by Monte Carlo methodology [Volume 18, Issue 18, 2019, Pages 1-11]
-
MTD
A road map to the detection performance of LFM-PC search radars with CFAR detectors [Volume 18, Issue 18, 2019, Pages 1-16]
-
MTI
Detection of Targets with Small Apparent Doppler Frequencies in LFMCW Radars [Volume 18, Issue 18, 2019, Pages 1-8]
-
MTI
Design and Implementation of an Advanced Radar Signal Processor with Waveform Generator and BIST Unit on a Single FPGA Chip [Volume 18, Issue 18, 2019, Pages 1-10]
-
Multilayers cylinder
Design optimization for a three-layer shrink-fitted pressure vessel exposed to very high pressure [Volume 18, Issue 18, 2019, Pages 1-14]
-
Multi-Walled Carbon Nanotubes
Impact and bending analysis of composite scarf adhesive joints modified with MWCNTs at room and hot temperatures [Volume 18, Issue 18, 2019, Pages 1-21]
N
-
Nano-materials
Factors affecting irradiation of nano & micro materials by laser treatment industrial unit [Volume 18, Issue 18, 2019, Pages 1-11]
-
NBR
Performance characteristics of modified HMX-gun propellants [Volume 18, Issue 18, 2019, Pages 1-6]
-
NI USB-6001
Condition-based monitoring of a small centrifugal pump by vibration analysis [Volume 18, Issue 18, 2019, Pages 1-13]
-
NOx Emission
Parametric study for reducing emission characteristics using different computational schemes [Volume 18, Issue 18, 2019, Pages 1-17]
-
NPID
Control of master slave robotics system using optimal control schemes [Volume 18, Issue 18, 2019, Pages 1-12]
O
-
On-board computer (OBC)
Reliability prediction of on-board subsystem satellite by Monte Carlo methodology [Volume 18, Issue 18, 2019, Pages 1-11]
-
Open circuit potential (OCP)
Experimental verification of the parameters affecting the characteristics of mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding of stainless-steel joints [Volume 18, Issue 18, 2019, Pages 1-13]
-
Open circuit potential (OCP)
Mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding for duplex stainless steel: A comparative study [Volume 18, Issue 18, 2019, Pages 1-15]
-
Optical properties
Crystal structure and optical properties of 1D-bi based organic-inorganic hybrid perovskite [Volume 18, Issue 18, 2019, Pages 1-13]
-
Optimization
Optimization of low signature base bleed propellant formulations [Volume 18, Issue 18, 2019, Pages 1-10]
-
Optimization
Design optimization for a three-layer shrink-fitted pressure vessel exposed to very high pressure [Volume 18, Issue 18, 2019, Pages 1-14]
-
Optimization
Optimized planar terahertz Yagi-Uda antenna using hybrid GSA-PSO optimization algorithm [Volume 18, Issue 18, 2019, Pages 1-5]
P
-
PETN
Involving PETN explosive into polyurethane polymer matrix for reactive armour applications [Volume 18, Issue 18, 2019, Pages 1-6]
-
PID
Control of master slave robotics system using optimal control schemes [Volume 18, Issue 18, 2019, Pages 1-12]
-
PID
PID vs. Backstepping Control for Cooperative Quadrotors Unmanned Aerial Vehicles [Volume 18, Issue 18, 2019, Pages 1-23]
-
PID tuning techniques
Modeling of fixed wing UAV and design of multivariable flight controller using PID tuned by local optimal control [Volume 18, Issue 18, 2019, Pages 1-19]
-
Plasma discharge
Simulator design for low pressure plasma discharges in planar geometry [Volume 18, Issue 18, 2019, Pages 1-6]
-
Point of Common Coupling
Harmonic mitigation for power rectifier using passive filter combination [Volume 18, Issue 18, 2019, Pages 1-9]
-
Potential cyclic voltammetry (PCV)
Experimental verification of the parameters affecting the characteristics of mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding of stainless-steel joints [Volume 18, Issue 18, 2019, Pages 1-13]
-
Power Quality Indices
Harmonic mitigation for power rectifier using passive filter combination [Volume 18, Issue 18, 2019, Pages 1-9]
-
Propellant
Performance of advanced composite solid rocket propellants based on novel oxidizers [Volume 18, Issue 18, 2019, Pages 1-7]
-
Pulsed plasma thrusters
Firing test and evaluation of coaxial pulsed plasma thruster [Volume 18, Issue 18, 2019, Pages 1-14]
Q
-
Quadrotor
PID vs. Backstepping Control for Cooperative Quadrotors Unmanned Aerial Vehicles [Volume 18, Issue 18, 2019, Pages 1-23]
R
-
Radar
Design and Implementation of an Advanced Radar Signal Processor with Waveform Generator and BIST Unit on a Single FPGA Chip [Volume 18, Issue 18, 2019, Pages 1-10]
-
Radiometric Calibration
Feature extraction from high resolution satellite images using K-means and colour threshold approach [Volume 18, Issue 18, 2019, Pages 1-12]
-
RDX
Optimization of low signature base bleed propellant formulations [Volume 18, Issue 18, 2019, Pages 1-10]
-
Recycled tire rubber
Mechanical behaviour of rubber hybrid composites [Volume 18, Issue 18, 2019, Pages 1-8]
-
Redundancy
Reliability prediction of on-board subsystem satellite by Monte Carlo methodology [Volume 18, Issue 18, 2019, Pages 1-11]
-
Reentry vehicle
Unsteady numerical analysis of drag on non-winged hypersonic vehicle during re-entry [Volume 18, Issue 18, 2019, Pages 1-11]
-
Reinforcement Learning
Controller parameter tuning using actor-critic algorithm [Volume 18, Issue 18, 2019, Pages 1-8]
-
Reliability
Reliability prediction of on-board subsystem satellite by Monte Carlo methodology [Volume 18, Issue 18, 2019, Pages 1-11]
-
Remote laser-welding
Mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding for duplex stainless steel: A comparative study [Volume 18, Issue 18, 2019, Pages 1-15]
-
Residual stresses
Design optimization for a three-layer shrink-fitted pressure vessel exposed to very high pressure [Volume 18, Issue 18, 2019, Pages 1-14]
-
Rocket motor case structures
Review of challenges of the design of rocket motor case structures [Volume 18, Issue 18, 2019, Pages 1-13]
S
-
Satellite
Reliability prediction of on-board subsystem satellite by Monte Carlo methodology [Volume 18, Issue 18, 2019, Pages 1-11]
-
Satellite
Low-cost steerable antenna for satellite applications [Volume 18, Issue 18, 2019, Pages 1-6]
-
Satellite dynamic
Flight dynamic model for low earth orbit satellites [Volume 18, Issue 18, 2019, Pages 1-12]
-
Scanning Electron Microscope (SEM)
Experimental verification of the parameters affecting the characteristics of mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding of stainless-steel joints [Volume 18, Issue 18, 2019, Pages 1-13]
-
Scanning Electron Microscope (SEM)
Mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding for duplex stainless steel: A comparative study [Volume 18, Issue 18, 2019, Pages 1-15]
-
Scanning Electron Microscopy
Thermal behaviour of MWCNT/ammonium perchlorate particles [Volume 18, Issue 18, 2019, Pages 1-9]
-
Scarf adhesive joint
Impact and bending analysis of composite scarf adhesive joints modified with MWCNTs at room and hot temperatures [Volume 18, Issue 18, 2019, Pages 1-21]
-
SC thermal control
Investigation the effectiveness of using heat pipe on the temperature uniformity distribution over the SC equipment panel [Volume 18, Issue 18, 2019, Pages 1-15]
-
SEM
Mechanical behaviour of rubber hybrid composites [Volume 18, Issue 18, 2019, Pages 1-8]
-
Shrink-fit
Design optimization for a three-layer shrink-fitted pressure vessel exposed to very high pressure [Volume 18, Issue 18, 2019, Pages 1-14]
-
Simulation
LFM-PC Radar Evaluation in Presence of Jamming using SystemVue [Volume 18, Issue 18, 2019, Pages 1-6]
-
SMED methodology
Waste reduction by linear programing optimizing [Volume 18, Issue 18, 2019, Pages 1-14]
-
Steerable beam
Low-cost steerable antenna for satellite applications [Volume 18, Issue 18, 2019, Pages 1-6]
-
Swirl
Thermal and combustion characteristics of a double ring burner with different swirling flow patterns [Volume 18, Issue 18, 2019, Pages 1-13]
-
System Stability
Design of a roll autopilot for a skid-to-turn guided missile [Volume 18, Issue 18, 2019, Pages 1-15]
-
SystemVue
LFM-PC Radar Evaluation in Presence of Jamming using SystemVue [Volume 18, Issue 18, 2019, Pages 1-6]
-
SystemVue Simulation
A road map to the detection performance of LFM-PC search radars with CFAR detectors [Volume 18, Issue 18, 2019, Pages 1-16]
T
-
Tactical Wireless Networks
Design and implementation of new security architecture for wireless network [Volume 18, Issue 18, 2019, Pages 1-14]
-
Teleoperation
Mobile robot position estimation using Euler-Maruyama algorithm [Volume 18, Issue 18, 2019, Pages 1-8]
-
TESLA P100
Enhancing the performance of CNN-based blind image steganalysis approach using multi-GPU TESLA P100 [Volume 18, Issue 18, 2019, Pages 1-10]
-
Thermal gravimetric analysis
Thermal behaviour of MWCNT/ammonium perchlorate particles [Volume 18, Issue 18, 2019, Pages 1-9]
-
Thermo-mechanical impact loads
Impact and bending analysis of composite scarf adhesive joints modified with MWCNTs at room and hot temperatures [Volume 18, Issue 18, 2019, Pages 1-21]
-
TIG welding
Mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding for duplex stainless steel: A comparative study [Volume 18, Issue 18, 2019, Pages 1-15]
-
TNEF
Performance of advanced composite solid rocket propellants based on novel oxidizers [Volume 18, Issue 18, 2019, Pages 1-7]
-
TNENC
Performance of advanced composite solid rocket propellants based on novel oxidizers [Volume 18, Issue 18, 2019, Pages 1-7]
-
Transfer Learning
Enhancing the performance of CNN-based blind image steganalysis approach using multi-GPU TESLA P100 [Volume 18, Issue 18, 2019, Pages 1-10]
-
Trilateration
Wi-Fi based indoor localization using trilateration and fingerprinting methods [Volume 18, Issue 18, 2019, Pages 1-20]
-
Turboshaft gas turbine engine
Black-box modelling of gas turbine engine’s electrohydraulic fuel metering system. [Volume 18, Issue 18, 2019, Pages 1-12]
-
Turbulent Combustion
Parametric study for reducing emission characteristics using different computational schemes [Volume 18, Issue 18, 2019, Pages 1-17]
-
Turbulent Swirling Flames
Hyperspectral imaging and analysis of swirling flames issued from two and four slots circumferential burners [Volume 18, Issue 18, 2019, Pages 1-17]
-
Twin-fluid
Study of cold spray and combustion stability of effervescent atomizer [Volume 18, Issue 18, 2019, Pages 1-15]
-
Twin-fluid
Spray combustion characteristics of effervescent atomizer inside experimental furnace [Volume 18, Issue 18, 2019, Pages 1-17]
U
-
Underwater explosion
Theoretical and experimental study of underwater explosion performance of selected explosive compositions [Volume 18, Issue 18, 2019, Pages 1-12]
-
Unmanned Air Vehicles
PID vs. Backstepping Control for Cooperative Quadrotors Unmanned Aerial Vehicles [Volume 18, Issue 18, 2019, Pages 1-23]
V
-
VHDL
Design and Implementation of an Advanced Radar Signal Processor with Waveform Generator and BIST Unit on a Single FPGA Chip [Volume 18, Issue 18, 2019, Pages 1-10]
-
Vibration
Vibration caused by swing check valve closure [Volume 18, Issue 18, 2019, Pages 1-17]
-
Vibration monitoring
Condition-based monitoring of a small centrifugal pump by vibration analysis [Volume 18, Issue 18, 2019, Pages 1-13]
W
-
Welding Parameters
Experimental verification of the parameters affecting the characteristics of mechanical and corrosion behaviour of conventional and high-speed remote scanner laser welding of stainless-steel joints [Volume 18, Issue 18, 2019, Pages 1-13]
-
Wi-Fi signal
Wi-Fi based indoor localization using trilateration and fingerprinting methods [Volume 18, Issue 18, 2019, Pages 1-20]
Y
-
Yagi-Uda
Optimized planar terahertz Yagi-Uda antenna using hybrid GSA-PSO optimization algorithm [Volume 18, Issue 18, 2019, Pages 1-5]
Your query does not match with any item